The WEH® Quick Connector TW03 is the perfect tool for pressure and vacuum testing of components with internal thread up to 276 bar max.
Only place the connector into the threaded port and hand-tighten it until the o-ring seal contacts the test piece - the pressure-tight connection is established. The WEH® TW03 seals without wrenches, sealants or tape saving connection time & costs.
The higher the test pressure, the tighter the WEH® Connector will clamp itself into the threaded test piece port. The pressure-assisted piston ensures a pressure-tight connection.
Wear-resistant NBR seals meet most industrial requirements and are very durable. The connector is extremely easy to maintain with simple seal replacement and minimizes down-time.
- Pressure-tight connections by hand-tightening
- Simple seal replacement
- Ergonomic design
- High-grade materials
Max. allowable operating pressure PS | Vacuum up to max. 276 bar (4,000 psi) |
Temperature range | +5 °C up to +80 °C |
Connects to | NPT 3/8" internal thread |
Media inlet | G3/8" internal thread |
Leak rate | 1 x 10-3 mbar x l/s |
Actuation | Hand-tightening |
Material | Corrosion resistant stainless steel |
Sealing material | NBR |
Conformity / Tests / Approvals | PED 2014/68/EU |
Part No. | C1-12235 |
Screw connector for pressure testing / vacuum testing of components with internal thread for the following standard sizes:
- NPT thread (ANSI/ASME B1.20.1-1983) | NPT 3/8" internal thread
The TW03 Screw connector is suitable for testing fittings, fixtures, tubes / pipes, boilers, tanks, radiatiors, hydraulic manifolds / hydraulic blocks, turbine housings and automotive components.