Product Line


Zoom +

WEH® Connector TW01 for leak testing of straight tubes, tube ID 26.0 - 28.0 mm, pneumatic actuation, vacuum up to max. 9 bar

Add to Compare
  • Connection in seconds
  • No hand tightening required
  • Sealing irregular or rough surfaces
  • Stroke limiter
  • Simple seal replacement
Video
  • WEH® Connector TW01 | A real multi-talent for leak tests
    WEH® Connector TW01 | A real multi-talent for leak tests
    Like all WEH® Products the TW01 is extremely durable, easy to maintain and achieves impressive cost savings as a result of excellent productivity gains. Inside bores, irregular or rough hoses and many other components can be instantly connected ready for leak testing, vaccum testing, helium testing and function testing. Automated test procedures allow for significant cost reductions and productivity gains.
Description
WEH® Connector TW01 for leak testing of straight tubes, tube ID 26.0 - 28.0 mm, pneumatic actuation, vacuum up to max. 9 bar

The WEH® TW01 Quick Connector is the perfect tool for pressure and vacuum testing as well as for pressure decay, underwater and helium testing. The Connector reliably and quickly seals bores, internal tubes and internally threaded components, and can also be used for flushing and filling.

The pneumatic actuation makes the coupling the ideal choice for quality testing during production and automation of test procedures, thus increasing productivity.

Only plug the connector into the test piece, apply pilote pressure and the pressure-tight connection is established - in just seconds without tedious hand-tightening. The easy handling creates significant time and cost saving.

As a standard the WEH® TW01 quick coupler is equipped with a stroke limitation and with an additional front seal for connection to internal threads. The elastic front seal compresses into the test piece, compensating for possible tolerances in a component‘s size and reliably seals out of round and rough surfaces. The connector only clamps itself firmly over the sealing rubber of the test piece, but does not have any retaining function. Therefore a fixture must be used.

Special versions, e.g. twin connectors for sealing ports in close proximity to each other are available on request. Shaft extensions or shortenings for TW01 Connectors complement the product family.

Features
  • Connection in seconds
  • No hand tightening required
  • Sealing irregular or rough surfaces
  • Stroke limiter
  • Simple seal replacement
  • Ergonomic design
  • High-grade materials
Technical Data
Max. allowable operating pressure PS Vacuum up to max. 9 bar (130 psi)
Pilot pressure 4 - 12 bar (60 - 175 psi) compressed air
Temperature range +5 °C up to +80 °C
Connects to Tube ID 26.0 - 28.0 mm
Media inlet G1/8" internal thread
Leak rate 1 x 10-3 mbar x l/s
Actuation Pneumatic actuation
Material Housing, piston and spacer: Aluminium
Sealing material Main seal chloroprene / o-rings NBR
Urethane seals for high-wear applications are optional,
for threaded applications as standard.
Conformity / Tests / Approvals PED 2014/68/EU
Part No. C1-141188
Application

Quick coupler for pressure testing / vacuum testing / pressure decay testing / helium testing / leak testing / filling / flushing / underwater testing of straight tubes, bores and components with internal thread for the following standard sizes:

  • Straight tube | Sealing range internal tube Ø 26.0 mm up to 28.0 mm

The TW01 Connector is suitable for testing vessels, valves, plastic vessels, pumps, medical components, filter, pressure vessels, tube connections and rubber hoses.Other applications are:

  • Leck test benches
  • Pick & place applications in automation technique
TW01 with hand slide valve for manual
actuation of pilot pressure
TW01 Leak proof connections to tube ID
Downloads
Document type Format Size Download
Press release PDF 106 KB
Datasheet PDF 567 KB
Inquiry List

 

You have no items in your inquiry list.

Back to Top